Tournaments
- Mwh65
- Site Admin
- Posts: 8978
- Joined: Mon Jan 19, 2015 9:27 pm
- Steam Profile name (Required): Mwh65
- Has Liked: 146 times
- Been Liked: 405 times
Re: Tournaments
Ok go to this page ...
ladders_createagame.php
and if you have an active CAG in there make it inactive and try again.
Mark Holliday (Mwh65)
(PGLS Owner)
PGLS is not affiliated in any way with the game creator Perfect Parallel.
To donate to PGLS click here
(PGLS Owner)
PGLS is not affiliated in any way with the game creator Perfect Parallel.
To donate to PGLS click here
-
- Posts: 80
- Joined: Mon Aug 12, 2019 7:40 pm
- Location: United States
- Steam Profile name (Required): Niblick47
- Been Liked: 18 times
Re: Tournaments
I did have an active CAG, made it inactive and the tournaments now were showing! Made a different CAG active and all the tournaments as well as the CAG showed up as normal. So did the first CAG somehow become corrupted? In any case, thanks for all your help and resolution.
- Mwh65
- Site Admin
- Posts: 8978
- Joined: Mon Jan 19, 2015 9:27 pm
- Steam Profile name (Required): Mwh65
- Has Liked: 146 times
- Been Liked: 405 times
Re: Tournaments
Yep, I can now confirm that the Pin Positions were being truncated.
If you look at the actual CAG you just deactivated the Pin Positions at the bottom of it are incomplete.
The bug only occurs if you use a Pin Position of 10 or greater, which breaks the CAG and blocks all tournies in PG if it's made active.
Checking into this now.
If you look at the actual CAG you just deactivated the Pin Positions at the bottom of it are incomplete.
The bug only occurs if you use a Pin Position of 10 or greater, which breaks the CAG and blocks all tournies in PG if it's made active.
Checking into this now.
Mark Holliday (Mwh65)
(PGLS Owner)
PGLS is not affiliated in any way with the game creator Perfect Parallel.
To donate to PGLS click here
(PGLS Owner)
PGLS is not affiliated in any way with the game creator Perfect Parallel.
To donate to PGLS click here
-
- Posts: 80
- Joined: Mon Aug 12, 2019 7:40 pm
- Location: United States
- Steam Profile name (Required): Niblick47
- Been Liked: 18 times
Re: Tournaments
I see that. But if you look at the one that is active it has an 11 pin position on hole #2 and it's showing a 90 pin position on hole #9, which was entered as pin position 9. This also looks corrupted but all the tournaments as well as this show up. I had previously created a game on the same course using three #11 pin positions and everything loaded and played normally. But that was an 18 hole game and these were 9 hole games, maybe that's the difference.
- Mwh65
- Site Admin
- Posts: 8978
- Joined: Mon Jan 19, 2015 9:27 pm
- Steam Profile name (Required): Mwh65
- Has Liked: 146 times
- Been Liked: 405 times
Re: Tournaments
Thanks for the update
I've now fixed the issue with Pin Positions being truncated for Front 9 and Back 9 CAG games that contained a pin position of 10 or greater.
I've now fixed the issue with Pin Positions being truncated for Front 9 and Back 9 CAG games that contained a pin position of 10 or greater.
Mark Holliday (Mwh65)
(PGLS Owner)
PGLS is not affiliated in any way with the game creator Perfect Parallel.
To donate to PGLS click here
(PGLS Owner)
PGLS is not affiliated in any way with the game creator Perfect Parallel.
To donate to PGLS click here
-
- Posts: 80
- Joined: Mon Aug 12, 2019 7:40 pm
- Location: United States
- Steam Profile name (Required): Niblick47
- Been Liked: 18 times
Re: Tournaments
Thanks again for all your help. This probably never came up before because very few courses have that many pin positions.